Сите категории
Kошничка

JL663A

JL663A
JL663A
  • Switch type: Managed
  • Switch layer: L3
  • Basic switching RJ-45 Ethernet ports quantity: 48
  • SFP module slots quantity: 4
  • Switching capacity: 496
Врз основа на 0 коментари. - Напиши коментар
748,159ден.
  • Достапност:
  • Бренд: ARUBA BY HPE
  • Шифра: 432634
  • Гарантен рок: 12 месеци
  • Достава: 13-16 дена
Во кошничка
Листа на желби Спореди
1

Technical Specifications

  • Summary: HPE Aruba Networking CX 6300M 48-port 1GbE and 4-port SFP56 Switch. Switch type: Managed, Switch layer: L3. Basic switching RJ-45 Ethernet ports type: Gigabit Ethernet (10/100/1000), Basic switching RJ-45 Ethernet ports quantity: 48, USB 2.0 ports quantity: 1, Console port: USB. MAC address table: 32000 entries, Switching capacity: 496 Gbit/s. Networking standards: IEEE 802.1D, IEEE 802.1ab, IEEE 802.1ak, IEEE 802.1p, IEEE 802.1s, IEEE 802.1v, IEEE 802.1w, IEEE.... Power over Ethernet (PoE). Rack mounting
  • Vendor Homepage: https://www.hpe.com/
  • Name: NET SWITCH 48PORT 1GBE 4SFP56/6300M JL663A ARUBA BY HPE
  • Category Code: SWI
  • Model: JL663A
  • Series: CX 6300
  • Model name: Aruba Networking CX 6300M 48-port 1GbE and 4-port SFP56 Switch
  • Switch type: Managed
  • Switch layer: L3
  • Quality of Service (QoS) support: Yes
  • Configuring Location Settings (CLI): Yes
  • System event log: Yes
  • Basic switching RJ-45 Ethernet ports quantity: 48
  • Basic switching RJ-45 Ethernet ports type: Gigabit Ethernet (10/100/1000)
  • SFP module slots quantity: 4
  • Console port: USB
  • USB 2.0 ports quantity: 1
  • Networking standards: IEEE 802.1ab/IEEE 802.1ak/IEEE 802.1D/IEEE 802.1p/IEEE 802.1s/IEEE 802.1v/IEEE 802.1w/IEEE 802.3ad/IEEE 802.3ae/IEEE 802.3bt
  • 10G support: Yes
  • Port mirroring: Yes
  • IP routing: Yes
  • Policy-based routing: Yes
  • Auto MDI/MDI-X: Yes
  • Link aggregation: Yes
  • Spanning tree protocol: Yes
  • VLAN support: Yes
  • Transmission distance (max): 10
  • Switching capacity: 496
  • Throughput: 369
  • MAC address table: 32000
  • Latency (1 Gbps): 2.28
  • Latency (10 Gbps): 1.46
  • Number of queues: 8
  • Packet buffer memory: 8
  • DHCP features: DHCP relay/DHCP server
  • Access Control List (ACL): Yes
  • IGMP entries: 8000
  • SSH/SSL support: Yes
  • Multicast support: Yes
  • IPv4 multicast entries: 8000
  • IPv6 multicast entries: 8000
  • Number of multicast groups filtered: 4000
  • MLD entries: 4000
  • Routing protocols: OSPF/OSPFv3
  • Rack mounting: Yes
  • Stackable: Yes
  • Product colour: Black
  • Airflow direction: Front-to-back airflow
  • Number of fans: 2
  • Physical stacking (units): 10
  • Built-in processor: Yes
  • Processor frequency: 1800
  • Memory type: DDR4-SDRAM
  • Internal memory: 8000
  • Flash memory: 32000
  • Noise level: 28.7
  • Power supply included: Yes
  • AC input voltage: 100 - 240
  • Power consumption (max): 75
  • Power consumption note: Idle: 56W 100% Traffic Rate: 75W
  • Power supply note: 2 field-replaceable, hot-swappable power supply slots 1 minimum power supply required (ordered separately). Supports JL085A PSU.
  • Power over Ethernet (PoE): Yes
  • Latency: 1 Gbps: 2.28 µs 10 Gbps: 1.46 µs 25 Gbps: 1.90 µs 50 Gbps: 3.49 µs
  • Dimensions (W x D x H) (imperial): 1.73 x 17.4 x 15.2
  • Fan: Switch has two fan tray slots and comes with one fan tray installed. Minimum one fan trays required. Optional second fan tray ordered separately. Fan trays are field replaceable and hot-swappable. Each fan tray contains two fans.
  • I/O ports: 48 x 10/100/1000 BaseT ports 4 x 1G/10G/25G/50G [4] SFP ports 1 x USB-C console port 1 x USB Type-A host port 1 x OOBM port
  • Memory and processor: CPU: Dual-core Arm Cortex-A9 @ 1.8GHz Memory: 8 GB DDR4, 32 GB eMMC Flash: 8 MB, 16 MB, or 32 MB, depending on model and configuration
  • Performance management: Management flexibility with support for HPE Aruba Networking Central, easy-to-use Web GUI, CLI, and HPE Aruba Networking Switch Multi-Edit Software
  • Weight (imperial): 10.14
  • Operating temperature (T-T): 0 - 45
  • Storage temperature (T-T): -40 - 70
  • Operating relative humidity (H-H): 15 - 95
  • Storage relative humidity (H-H): 10 - 95
  • Operating altitude: 0 - 3000
  • Non-operating altitude: 0 - 4600
  • Width: 44
  • Depth: 442
  • Height: 385
  • Weight: 4950
  • Rack mount kit: Yes
  • Certification: EN 60950-1:2006; +A11:2009 +A1:2010; +A12:2011 + A2:2013 UL 60950-1 2nd Ed CAN/CSA-C22.2; No. 60950-1-07 IEC 60950-1:2005 EN 55022:2010, A; EN 55032:2012, A; EN 55024:2010; EN 61000-3-2:2014; EN 61000-3-3:2013 FCC 15 A ICES-003 A VCCI A; CISPR 22 A; CISPR
  • Harmonized System (HS) code: 85176990
  • Units per Shipping Box: 1
  • Unit Calculated Volume: 0.063
  • Unit Calculated Weight: 6.5
Specifications
10G supportYes
AC input voltage100 - 240
Access Control List (ACL)Yes
Airflow directionFront-to-back airflow
Auto MDI/MDI-XYes
Basic switching RJ-45 Ethernet ports quantity48
Basic switching RJ-45 Ethernet ports typeGigabit Ethernet (10/100/1000)
Built-in processorYes
CertificationEN 60950-1:2006; +A11:2009 +A1:2010; +A12:2011 + A2:2013 UL 60950-1 2nd Ed CAN/CSA-C22.2; No. 60950-1-07 IEC 60950-1:2005 EN 55022:2010, A; EN 55032:2012, A; EN 55024:2010; EN 61000-3-2:2014; EN 61000-3-3:2013 FCC 15 A ICES-003 A VCCI A; CISPR 22 A; CISPR
Configuring Location Settings (CLI)Yes
Console portUSB
Depth442
DHCP featuresDHCP relay/DHCP server
Dimensions (W x D x H) (imperial)1.73 x 17.4 x 15.2
FanSwitch has two fan tray slots and comes with one fan tray installed. Minimum one fan trays required. Optional second fan tray ordered separately. Fan trays are field replaceable and hot-swappable. Each fan tray contains two fans.
Flash memory32000
Harmonized System (HS) code85176990
Height385
I/O ports48 x 10/100/1000 BaseT ports 4 x 1G/10G/25G/50G [4] SFP ports 1 x USB-C console port 1 x USB Type-A host port 1 x OOBM port
IGMP entries8000
Internal memory8000
IP routingYes
IPv4 multicast entries8000
IPv6 multicast entries8000
Latency1 Gbps: 2.28 µs 10 Gbps: 1.46 µs 25 Gbps: 1.90 µs 50 Gbps: 3.49 µs
Latency (1 Gbps)2.28
Latency (10 Gbps)1.46
Link aggregationYes
MAC address table32000
Memory and processorCPU: Dual-core Arm Cortex-A9 @ 1.8GHz Memory: 8 GB DDR4, 32 GB eMMC Flash: 8 MB, 16 MB, or 32 MB, depending on model and configuration
Memory typeDDR4-SDRAM
MLD entries4000
Multicast supportYes
Networking standardsIEEE 802.1ab/IEEE 802.1ak/IEEE 802.1D/IEEE 802.1p/IEEE 802.1s/IEEE 802.1v/IEEE 802.1w/IEEE 802.3ad/IEEE 802.3ae/IEEE 802.3bt
Noise level28.7
Non-operating altitude0 - 4600
Number of fans2
Number of multicast groups filtered4000
Number of queues8
Operating altitude0 - 3000
Operating relative humidity (H-H)15 - 95
Operating temperature (T-T)0 - 45
Packet buffer memory8
Performance managementManagement flexibility with support for HPE Aruba Networking Central, easy-to-use Web GUI, CLI, and HPE Aruba Networking Switch Multi-Edit Software
Physical stacking (units)10
Policy-based routingYes
Port mirroringYes
Power consumption (max)75
Power consumption noteIdle: 56W 100% Traffic Rate: 75W
Power over Ethernet (PoE)Yes
Power supply includedYes
Power supply note2 field-replaceable, hot-swappable power supply slots 1 minimum power supply required (ordered separately). Supports JL085A PSU.
Processor frequency1800
Product colourBlack
Quality of Service (QoS) supportYes
Rack mount kitYes
Rack mountingYes
Routing protocolsOSPF/OSPFv3
SFP module slots quantity4
Spanning tree protocolYes
SSH/SSL supportYes
StackableYes
Storage relative humidity (H-H)10 - 95
Storage temperature (T-T)-40 - 70
SummaryHPE Aruba Networking CX 6300M 48-port 1GbE and 4-port SFP56 Switch. Switch type: Managed, Switch layer: L3. Basic switching RJ-45 Ethernet ports type: Gigabit Ethernet (10/100/1000), Basic switching RJ-45 Ethernet ports quantity: 48, USB 2.0 ports quantity: 1, Console port: USB. MAC address table: 32000 entries, Switching capacity: 496 Gbit/s. Networking standards: IEEE 802.1D, IEEE 802.1ab, IEEE 802.1ak, IEEE 802.1p, IEEE 802.1s, IEEE 802.1v, IEEE 802.1w, IEEE.... Power over Ethernet (PoE). Rack mounting
Switch layerL3
System event logYes
Throughput369
Transmission distance (max)10
USB 2.0 ports quantity1
VLAN supportYes
Weight4950
Weight (imperial)10.14
Width44
Specs
Category CodeSWI
Description

The HPE Aruba Networking CX 6300 Switch Series is a modern, flexible, and intelligent family of stackable switches ideal for access, aggregation, and data center top-of-rack (ToR). Featuring a cloud-native design and fully programmable operating system (OS). The CX 6300 delivers advanced monitoring and troubleshooting with capabilities like a real-time network analytics engine, HPE Aruba Networking Switch Multi-Edit Software and flexible deployment options to implement and validate network configurations. A powerful Gen7 ASIC architecture delivers fast, non-blocking performance for AI, Wi-Fi 7, and Internet of Things (IoT) requirements. HPE Aruba Networking Virtual Stacking Framework (VSF) allows for stacking of up to 10 switches, providing scale and simplified management. This flexible series has built-in high-speed uplinks and supports high-density IEEE 802.3bt high-power PoE with HPE Smart Rate multi-gigabit Ethernet.

What is new supporting point:
The HPE Aruba Networking CX 6300 Switch Series is a family of stackable Layer 3 switches with BGP, EVPN, VXLAN, VRF, OSPF routing, robust quality of service (QoS), MACsec 256, PTP, AVB and LRM [1]
Three stackable Layer 2-only CX 6300L switches with HPE Smart Rate multi-gigabit and MACsec 256 encryption are available for high performance access deployments
Powerful 7th Gen ASIC architecture provides the CX 6300 series with 880 to 1760 Gbps system switching capacity, 660 to 1310 Mpps of system throughput and up to 200 to 400 Gbps stacking bandwidth
High availability with choice between 2 to 10-member Virtual Switching Framework (VSF) stacking for scale, or 2-member Virtual Switching Extension (VSX) cluster for active-active redundancy
Options include 24 to 48-port of HPE Smart Rate multi-gigabit (1/2.5/5/10GbE) and 1GbE fiber, supporting up to 90W 802.11bt PoE, all with telemetry and automation via the CX Network Analytics Engine
Manage through single point of control with HPE Aruba Networking Central across wired, wireless, and WAN. Dynamic segmentation enables enhanced security and simple access for users and IoT

  • Stackable Layer 3 switches with BGP, EVPN, VXLAN, VRF, and OSPF with robust security and QoS
  • High performance 880 Gbps system switching capacity, 660 MPPS of system throughput and up to 200 Gbps stacking bandwidth
  • Compact 1U switches with full density HPE Smart Rate (1/2.5/5GbE) multi-gigabit, 60W PoE and SFP+ models
  • Built-in high speed 10GbE/25GbE/50GbE uplinks
  • Intelligent monitoring, visibility, and remediation with Aruba Network Analytics Engine
  • One touch deployment with the Aruba CX Mobile App
  • Aruba NetEdit support for automated configuration and verification
  • Aruba Dynamic Segmentation enables secure and simple access for users and IoT

[1] Features not supported on CX 6300L switches (S3L75A, S3L76A, S3L77A)
[2] The simultaneous use of HPE Aruba Networking Virtual Switching Framework stacking and its cluster is not supported. A switch may either be its member or an HPE Aruba Networking Virtual Switching Extension cluster.

ModelJL663A
Model nameAruba Networking CX 6300M 48-port 1GbE and 4-port SFP56 Switch
NameNET SWITCH 48PORT 1GBE 4SFP56/6300M JL663A ARUBA BY HPE
PictureUrlhttps://static.elko.cloud/ProductImages/52cc9c20-2c86-48b3-824e-d72f6fdb5d9d.Jpeg
SeriesCX 6300
Switch typeManaged
Switching capacity496
thumbnailImagePathhttps://static.elko.cloud/ProductImagesThumbs/52cc9c20-2c86-48b3-824e-d72f6fdb5d9d.Jpeg
Unit Calculated Volume0.063
Unit Calculated Weight6.5
Units per Shipping Box1
Vendor Homepagehttps://www.hpe.com/